Vacuum Emulsifying Mixer

Vacuum Emulsifying Mixer

Vacuum Emulsifying Mixer is a small scale equipment and it is used for laboratory purposes. It is used to mix a variety of chemicals with precise mixing values.

It also has CIP (Clean-In-Place) and Sterilize-In-Place feature that makes it safe to operate even with dangerous chemicals. This feature is important because it automatically triggers cleaning process to avoid product contamination.

High Shear Emulsifier

High shear mixing is a technique used to disperse liquids or solids into another liquid in order to form an emulsion. This can be done with a variety of mixers, including rotor stator or multitooth mixers. This type of mixer is ideal for applications like making mayonnaise, body creams and pharmaceutical solutions.

The process works by drawing in the product through an inlet connection, exposing it to mechanical and hydraulic shear at the interface of a rotor and stator, and then expelling it through an outlet connection. This can be accomplished with powder hoppers, flexible tubes and wands, and even sanitary fittings.

These mixers are capable of producing a consistent, agglomerate free Vacuum Emulsifying Mixer emulsion in one pass, unlike more aggressive, higher energy devices such as colloid mills and high pressure homogenizers which require multiple recirculations to produce an emulsion. This allows for a more efficient and cost effective production method.

Hydraulic Shearing

This mixer is very useful for mixing creams, ointments and liquid products. It has a mechanism that prevents dead corners. This is a very important feature for such a large machine. It also has a cooling system that helps reduce the amount of heat it emanates during operation.

The machine is made of high-quality stainless steel, and it has many safety features, including colored push buttons that make them harder to accidentally press. It also has an alarm system that lets you know if the vacuum valves aren’t held tight enough.

The Vacuum Emulsifying Mixer is a very powerful mixer that uses a combination of agitation, shear cracking, impact and turbulence to produce high-quality emulsions in a short time. This type of mixer is ideal for emulsifying oils with high viscosity. It has a wide range of applications and works well in high-pressure environments.

Centrifugal Extrusion

The machine can be used for emulsifying different materials. It has an oil pot that dissolves solid particles in the oil phase and a water pot that mixes them with solvent. The dissolved ingredients are then sucked into an emulsifying pot to form a rigorous mix.

This device also helps you reduce the amount of raw material wastage during production. This results in cost savings for your manufacturing unit. It also allows you to increase your production capacity.

It is a great tool for cosmetic industries that process ointments, oral syrups, and latex. It is also useful for pharmaceutical and food industries. It can be used to make mayonnaise, ketchup, dressings, chocolate frostings, and sauces. It is important to regularly clean the machine and its base to prevent rust and contamination. This machine complies with CGMP requirements like Clean-In-Place (CIP) and Sterilize-In-Place (SIP). It has all product contact parts made of stainless steel 316L.

Impacting

This small vacuum emulsifying mixer is mixer supplier used for mixing different chemicals in laboratories. It has a stainless steel frame with an upside stand, mixing pot, vacuum pump, temperature meter and other accessories. It also has a control system to adjust homogenizer speed and time. This machine has high-efficiency insulation and is suitable for a variety of industrial applications.

It is widely used in cosmetics, medicine, food and chemistry industry. It can emulsify products with a large matrix viscosity and high solid content. It can also be used to make creams, lotions and ointments. It can even be used to emulsify thick sources like jam, butter, and margarine in the food industry. It can be also used to emulsify dyeing industrial products and printing inks.

This device saves time and reduces wastage in the production process. It also improves the uniformity of the product. It is safer to use than manual blending machines and has more accurate measurements. It is also less expensive to operate than conventional mixers. It has many safety features, including colored push buttons to prevent accidents.

Breaking

The suppository vacuum emulsifying mixer makes cream, lotion, and ointments by mixing chemicals and natural ingredients. It also helps make oils that contain a lot of solids into emulsions. It has a triple blender, a hydraulic lift cover, and a high-speed homogenizer. It is designed to meet GMP standards and has many safety features.

The homogenizer head consists of a high-speed rotor and a stator with holes. The rotor rotates at a very high speed, creating pressure differences that shear, mix, and emulsify the materials. The sheared material then gushes out of the homogenizer’s top and into the blade mixer’s down force.

The hydraulic lifting system is a crucial part of the machine, as it controls how fast or slow the blending process is. It’s important to check the condition of this system regularly to ensure it works properly. This includes assessing its appearance, viscosity, and temperature. It’s also important to look for any signs of a leak.

Turbulence

Vacuum Emulsifying Mixer is a multi-functional mixing, dispersing, homogenizing and emulsifying system that can be used in a wide variety of industries. It is a highly efficient machine and can be used to process products such as mayonnaise, ketchup, chocolate frostings, sauces and many others.

It has a variety of features that make it safer to use than traditional mixers. These include a safety valve, CIP cleaning system, break vacuum hole and pressure air inlet hole. The machine is also energy-efficient and uses less power to run its processes.

It is important to keep your machine in good condition to ensure optimal performance and longevity. This means cleaning it regularly using water and soap. It is also a good idea to keep a maintenance log to help troubleshoot any problems that arise. This will allow you to get the most out of your mixer.